Three Leg Galvanized Angle Iron Telecommunication Tower For Strong Signal Coverage

Product Description:

The triangular angle steel tower communication and telecommunication tower we make is specially built to meet the needs of modern communications. The unique triangular structure draws on the stability principle in geometry. Compared with other structural forms, it can withstand greater loads and external force impacts with the same amount of materials, ensuring the stable installation of communication equipment and stable signal transmission. Whether it is a bustling city, a remote village, or a mountainous area or coastal area with complex terrain, it can operate stably to meet the communication coverage needs of different regions. ​

Q355B high-strength angle steel is used as the main material. This type of steel has high yield strength and good toughness, and can withstand greater tension and pressure. The hot-dip galvanizing process puts on a layer of "protective armor" for the steel. The thickness of the zinc layer is ≥85μm. In a salt spray environment, there is no obvious rust after 1000 hours of testing, which effectively prevents steel oxidation and rust, greatly extending the service life of the tower. Normal use can reach more than 25 years, reducing the subsequent maintenance cost and replacement frequency.​

Through rigorous mechanical calculations and simulation analysis, the tower structure design is optimized, and the wind load body shape coefficient is as low as 0.35. It can withstand 12-level strong winds (wind speed ≥ 38m/s), and it can stand even in typhoon-prone areas. For areas with frequent earthquakes, seismic reinforcement design is carried out to effectively resist 8-degree earthquake fortification, ensuring that the communication network is not interrupted during earthquake disasters and ensuring emergency communication needs. ​

It supports high customization, from a small tower of 15 meters to a large tower of 60 meters, which can be flexibly selected according to different terrains, communication coverage and signal strength requirements. The tower body reserves sufficient equipment installation interfaces and platforms to adapt to various communication equipment such as antennas, feeders, signal amplifiers, etc., making subsequent upgrades and renovations easy and convenient, protecting customers' initial investments. ​

The modular design concept runs through the entire process, and the tower body is divided into multiple standardized modules, each of which is prefabricated in the factory with high precision and reliable quality. During on-site installation, only simple splicing and bolt tightening are required, which greatly shortens the construction period and improves efficiency by more than 40% compared with traditional tower installation. At the same time, detailed installation drawings and professional technical guidance are provided to help the installation team complete the construction quickly and accurately.

Features:

1. Excellent structural stability
Our tower adopts a quadrilateral frame design that evenly divides the load into four columns, and has 30% more stability than traditional designs. Tower Q355B High strength steel MPa It is made up of more than 12 levels of strong wind (maximum wind 38 meters / sec) and 8 levels of earthquakes, and ensures continuous operation under severe weather.
Excellent corrosion resistance
Each tower is galvanized and the thickness of the plating layer is μm That's it. It has also passed over 1000 hours of salt water spray test (ISO 1461 standards). This excellent corrosion resistance makes it ideal for coastal areas, industrial zones, and moist environments and extends the service life to over 25 years and reduces maintenance costs.
3. Flexible customization
Our tower has a wide range of height from 15 meters to 60 meters. With multiple installation platforms and standardized interfaces, antennas, signal booster, and G/5G You can install the equipment. Module design allows quick assembly and future upgrades.
4. Compliance with international standards
Our products meet international quality and safety requirements YD/T 5131-2005( China ANSI/TIA-222-G( United States CE(EU) . This allows you to seamlessly integrate into a worldwide communication project.
5. Comprehensive service support
We provide end to end solutions, including on-site custom engineering, global shipping and installation guidance. Technical support and rapid after-sales service for 24 hours and 365 days will provide you with relief from all over the world.

Applications:

1. 4G/5G Communication network
Our four story steel tower is perfect for urban and local base stations AAU, Supports stable signal boosters. High strength structures and corrosion resistant coatings make it even more reliable in remote areas and complex terrain G/5G Signal transmission.
2. Coastal and offshore Communications
These towers are designed to be able to withstand harsh marine environments. The surface of the hot dip galvanizing film is resistant to salt water spray and humidity, and the four story steel tower increases stability even under strong wind, and becomes the key to the ocean communication and navigation system.
3. Emergency and disaster relief
When a natural disaster such as a typhoon, an earthquake, a flood occurs, our tower functions as an emergency communication hub that can be developed quickly. Module design allows you to quickly install, restore network connections, support rescue operations, emergency broadcasting and disaster recovery operations.
4. Monitoring and security infrastructure
These towers provide a powerful platform for surveillance cameras, sensors and surveillance equipment in airports, ports, industrial parks and border management areas. Its extensive and structural strength covers a wide range and ensures comprehensive security and security and real-time data collection.
5. Smart city IoT Integration
As part of the smart city initiative, our tower is an environmental sensor, traffic monitoring device, public Wi-Fi Hot spot IoT Device integration. Customizable design supports various transformations, promotes digital transformations, and improves urban management.
6. Broadcast and media transmission
For radio stations and television stations, these towers help to broadly transmit broadcast signals in a wide range. With high load resistance, large antenna and transmission equipment can be accommodated, and the media coverage in the world is clear and uninterrupted.

Packing and Shipping:

1. Strict screening and scientific use of packaging materials
In the packaging of three-tube communication angle steel towers, the choice of materials is directly related to transportation safety. For key connection parts of the tower body, such as flanges and bolt holes, in addition to wrapping film protection, special anti-collision foam and wooden corner guards are also installed. Anti-collision foam has excellent cushioning performance and can absorb impact during transportation; wooden corner guards provide rigid support for components to prevent corners from deforming due to collision. ​
Small accessories such as bolts, nuts, gaskets, etc. are classified and packaged in high-strength sealed boxes. Each sealed box is equipped with a detailed list label, indicating the name, specification, and quantity of the accessories, which is convenient for on-site installers to check and accept, and avoid affecting the construction progress due to missing accessories. In addition, desiccant is placed in the sealed box to prevent accessories from rusting in a humid environment and ensure their performance. ​
2. Overall packaging structure optimization
In order to ensure that the relative positions of the components of the three-tube communication angle steel tower are fixed during transportation, the overall packaging is bundled with steel frames. The steel frame is customized according to the size of the tower body, and is connected by welding or bolts to form a stable frame, which tightly fixes the main components of the tower body and the packaged accessories.
3. Full monitoring and guarantee of the transportation process

In order to achieve real-time grasp of the transportation status of goods, all transportation vehicles/vessels are equipped with high-precision GPS positioning systems. Customers can check the location of goods, driving speed and other information at any time through the exclusive platform or mobile application to ensure the transparency of the transportation process.